SunGuard® High Performance

Neutral Plus 50

Create your vision—with a view

If you can imagine it, you can build it with SunGuard® HP Neutral Plus 50. This high-performance, low-E glass allows architects the freedom to explore interior and exterior light. Typically, high transparency means high heat and ultraviolet light. With HP Neutral Plus 50, buildings minimise solar energy gain while allowing maximum visible light transmission for virtually any application. Design distinctive buildings with glass that offers structural integrity, uniformity, strength and optimum clarity.

Request Neutral Plus 50 Sample

Product Downloads:

SunGuard® Brochure BUILDING INFORMATION MODELING (BIM)

Can be laminated

Available on laminated and acoustic laminated glass for more security and comfort

Flexible

Can be tempered, heat-strengthened, curved, or screen-printed with approved enamels

Easy to process

Single product

For both annealed and heat-treated applications

Specs and Downloads

ThicknessTitle

  • 3mm – 12mm

Available sizes

  • Maximum Height x Width: 3660 mm x 2440 mm

Recommended coating positions

  • Double Glazed: 2

Application type

  • Can be used in: Insulating Glass Unit

Visual Appearance

Use the glass visualizer to get an introductory understanding of how glass will appear in use. Use the Glass Analytics™ tools to explore even more options for colour and performance.

Visual Appearance

Use the glass visualizer to get an introductory understanding of how glass will appear in use. Use the Glass Analytics™ tools to explore even more options for colour and performance.

* Please see Colour Disclaimer at the bottom of the page for additional information.

Performance Data

  • Transmittance

    1. Visible Light 48
    2. Ultraviolet 20
    3. Solar Energy 26
    4. Light to Solar Gain (LSG) 1.5
  • Reflectance

    1. Visible Light Outside 26
    2. Visible Light Inside 21
    3. Solar Energy Outside 32
  • U-Value

    1. Summer Day (W/m²·K) 1.63
  • Heat Gain

    1. Relative Heat Gain (RHG) W/m² 247
    2. Solar Heat Gain Coefficient (SHGC) 0.32
  • Composition

    1. Composition 6 mm / 12 mm / 6 mm - coating on surface #2
    2. Glass 1 & Coating SunGuard® HP Neutral Plus 50 on Clear
    3. Glass 2 & Coating Clear
    4. Gap 1 100% Air
    5. Calculation Standard NFRC 2010

Displayed colours are intended to represent actual colour. Colour is a function of light and reflectivity and cannot be accurately portrayed online. Actual glass samples should be used to determine colour. Please order a sample and discuss colour with your Gujarat Guardian Representative to ensure you are pleased with your SunGuard® selection before ordering glass for your project.

The thermal stress guideline is only a rough guide to the thermal safety of a glazing. Other factors such as large glass areas, shapes and patterns, thick glass, glass damaged during shipping, handling or installation, orientation of the building, exterior shading, overhangs/fins that reduce wind speed, and areas with high daily temperature fluctuations can all increase the probability of thermal breakage. The results shown are not for any specific glazing installation and do not constitute a warranty against glass breakage.